Audi S1 Tuning via OBD2
Factory output 231 PS and 350 Nm. With the NGM App you flash your car straight through the OBD2 port to up to 320 PS and 500 Nm — no workshop, back to stock at any time.
All-in-One License
What it unlocks
- ECU Tuning Stage 1
- ECU Tuning Stage 2
- TCU Tuning Stage 1
- TCU Tuning Stage 2
- Pops & Bangs (Sport Mode)
- Stationary Rev Limiter
- Vmax Limiter Removal
- Hardware: Intake
- Hardware: Intercooler
- Hardware: Turbo Inlet
- Hardware: Downpipe
- Fuel: 98 Octane
- Fuel: 100 Octane
- Fuel: 102 Octane
Prices for this car
Two ways, one port
Required hardware: NGM OBD2 Bluetooth Adapter(one-time €99,00)
Track use only. This software is intended exclusively for use on closed circuits. Modifying the engine control unit can void road approval. The end user is responsible for complying with the regulations in their country.
Audi S1 Tuning with the NGM App: More Power via Software
The Audi S1 2.0 with 231 PS (built 2014 to 2018) leaves the factory with room to grow. The NGM App unlocks it through a pure software remap: no chip is swapped, nothing is opened. You flash optimized maps onto the ECU yourself. Stage 1 lifts your S1 to up to 300 PS, Stage 2 to up to 320 PS, all controlled from your phone.
Legal note: driving with optimized maps is not permitted on public roads and is intended for closed race tracks only. Optimizations can void the vehicle's operating permit and the manufacturer warranty. Use at your own risk.
Audi S1 Stage 1 and Stage 2: The Numbers
Both stages are part of the All-in-One licence, bound to your VIN. These are the concrete figures behind an Audi S1 stage 1 and stage 2 remap:
- S1 2.0, 231 PS (2014 to 2018), stock: 231 PS and 350 Nm
- Audi S1 Stage 1: up to 300 PS and 460 Nm
- Audi S1 Stage 2: up to 320 PS and 500 Nm
Please note: all maximum power figures were measured with 102 octane fuel and represent the maximum achievable output.
Stage 1 adds 69 PS and 110 Nm over stock, Stage 2 raises that to 89 PS and 150 Nm. Both are calibrations for the ECU.
The Sound Side of S1 Tuning
If power is one half of S1 tuning, sound is the other. The Sound licence for the S1 adds an experience layer on top of the remap: functions such as pops and bangs or exhaust flap control, depending on what your vehicle supports. You switch it from the same app, so the character of your S1 changes with a tap instead of a workshop visit.
How the Audi S1 Remap Works
No bench, no shipping your ECU, no waiting for a tuner's schedule. This is the process with the NGM App:
- Plug the NGM OBD Adapter into the OBD2 port of your S1.
- Connect the app on iOS or Android; the VIN identifies your exact vehicle.
- Pick your stage and flash. Each licence is bound by VIN to exactly one vehicle.
Vehicle data is usually available immediately. If the app has never been used with your vehicle and the data has to be prepared first, it typically takes around 5 days, at most 14.
Audi S1 Tuning: Frequently Asked Questions
How much hp does an Audi S1 make with Stage 1?
An Audi S1 2.0 with Stage 1 reaches up to 300 PS (around 296 hp) and 460 Nm, up from 231 PS and 350 Nm in stock form. Stage 2 pushes that further to up to 320 PS and 500 Nm.
Is an Audi S1 remap legal on public roads?
No, driving with optimized maps is not permitted on public roads; it is intended for closed race tracks only. A remap can void the operating permit and the manufacturer warranty, and you use it at your own risk.
What does Audi S1 tuning with the NGM App cost?
You can see the current prices for your vehicle directly at the top of this page in the licence cards, in your currency. Add the NGM OBD Adapter and you flash the car yourself.
What is the difference between Audi S1 Stage 1 and Stage 2?
Stage 1 takes the S1 2.0 to up to 300 PS and 460 Nm, Stage 2 to up to 320 PS and 500 Nm. Both are software calibrations for the ECU, and both are included in the All-in-One licence.
Do I need a workshop for an Audi S1 remap?
No, you flash your S1 yourself. Plug the NGM OBD Adapter into the OBD2 port, connect the NGM App on iOS or Android, and the VIN identifies your vehicle automatically. The whole process runs through the app.
How quickly can I start after buying a licence?
Usually immediately, because vehicle data for the Audi S1 is available right away in most cases. If the app has never been used with your vehicle and the data has to be prepared first, it typically takes around 5 days and at most 14.
Can I use one licence on more than one car?
No, each licence is bound by VIN to exactly one vehicle. Your S1 is identified automatically when the app connects through the OBD adapter, and the licence stays with that VIN.
More vehicles
See all supported vehicles →